warning:Before cleaning or maintaining the product, be sure to unplug the power plug of the household electric treadmill.
Cleaning: Comprehensive cleaning will greatly extend the life of household electric treadmills. Clean the dust regularly to keep the parts clean. Be sure to clean the exposed parts on both sides of the running belt, which will reduce the accumulation of impurities under the running belt. Make sure that the sports shoes are clean, and avoid carrying foreign objects under the running belt to wear the running board and running belt. The surface of the running belt must be scrubbed with a damp cloth dampened with soap. Please be careful not to splash water on the electrical components and under the running belt.
Warning: Before moving the motor protection cover, be sure to unplug the power supply of the household electric treadmill. Open the motor protection cover at least once a year to vacuum the motor, clean the running belt and lubricate the silicone oil.
The lubricating silicone oil has been pre-coated between the running board and the running belt of the general household electric treadmill. The friction between the running belt and the running board has a great influence on the service life and performance of household electric treadmills, so lubricating silicone oil must be applied regularly. It is recommended to check the running board regularly. If the running board is damaged, please contact the dealer or manufacturer.
It is recommended to apply lubricating silicone oil between the running belt and the running board of the electric treadmill according to the following schedule:
Light users ( use less than 3 hours per week ) once every 6 months
Middle users ( use 3— per week) 5 hours )Once every 3 months
often users ( more than 5 hours a week ) once every 1.5 months
it is recommended to buy lubricating silicone oil from the local distributor or contact the manufacturer directly.
In order to better maintain the electric treadmill and extend the life of the machine, it is recommended to turn off the power after 2 hours of continuous use and let the machine rest for 10 minutes before using it.
If the running belt is too loose, it will slip when running: if it is too tight, it may reduce the performance of the motor and increase the wear of the drum and running belt. When the running belt is tight, you can lift both sides of the running belt about 50-75mm away from the running board by hand.
Lubrication of the running board
1. We mentioned above that the running board should be lubricated in a timely manner, but not excessive lubrication. The more lubricant is not the better. Remember: reasonable lubrication is an important factor in improving the service life of the treadmill.
2. Check whether you need to apply lubricant again. Just grab the running belt and touch the center of the back of the running belt with your hands as much as possible. If your hands are stained with silicone oil ( somewhat damp ), it means no Lubricant needs to be added. If the running board is dry and there is no silicone oil in the hands, you need to add lubricating silicone oil.
3. Steps to apply lubricating silicone oil on the running board:
a. Stop the running belt, The folding machine;
b. run off the back of the treadmill belt; the oiler belt run extending into the intermediate position as far as possible, the silicone oil is sprayed on the inside of the running belt, the running with both sides coated with silicone oil. Using 1km / h of Run the treadmill at a speed to apply the silicone oil evenly, and lightly step on the running belt on the front of the treadmill from left to right. Maintaining for about a few minutes will allow the silicone oil to be completely absorbed by the running belt.